Air Baffle; Pci Riser Board Assembly - HP ProLiant DL360 G7 Maintenance And Service Manual

To replace the component, reverse the removal procedure.

Air baffle

To remove the component:
Power down the server (on page 25).
1.
Extend the server from the rack (on page 26).
2.
Remove the access panel
3.
If installed, remove the BBWC battery pack or the FBWC capacitor pack
4.
FBWC capacitor
Remove the air baffle.
5.
To replace the component, reverse the removal procedure.

PCI riser board assembly

To remove the component:
CAUTION:
and remove all AC power cords before removing or installing the PCI riser board assembly.
Power down the server (on page 25).
1.
Extend the server from the rack (on page 26).
2.
Remove the access panel
3.
If installed, remove the BBWC battery pack or the FBWC capacitor pack
4.
FBWC capacitor
Remove the air baffle
5.
Remove the PCI riser board assembly:
6.
Disconnect external cables connected to any existing expansion boards.
a.
Loosen the four PCI riser board assembly thumbscrews.
b.
("Access panel" on page 28).
pack" on page 37).
To prevent damage to the server or expansion boards, power down the server
("Access panel" on page 28).
pack" on page 37).
("Air baffle" on page 38).
("BBWC battery pack or
("BBWC battery pack or
Removal and replacement procedures 38