Optical Drive Option - HP ProLiant DL100 Series User Manual

Optical drive option

To install the component:
Power down the server (on page 15).
1.
Remove the server from the rack (on page 15).
2.
Remove the access panel (on page 16).
3.
Remove the air baffle (on page 16).
4.
Remove the 9.5-mm optical drive blank. Retain the blank for future use.
5.
Install the 9.5-mm optical drive assembly. When fully inserted, the assembly locking latch clicks.
6.
Using a T-15 screwdriver, secure the drive to the chassis.
7.
Hardware options installation 33