Osd Setup (Cd700 Series Only) - Observint CD600 Series User Manual

SECTION 2: INSTALLATION

2.4 OSD Setup (CD700 series only)

CD700 series cameras include on-screen
display (OSD) software for adjusting the
internal camera settings to complement
specific environment where it is installed.
Joystick
These settings are adjusted using the OSD
controller attached to the camera drop cable.
The OSD controller includes a joystick that
can be pushed down and rocked UP, DOWN,
left (L) and right (R), or, to open the menu
OSD
system and navigate the menus.
Controller
To use the OSD controller, press the joy stick in (toward the controller block) to open the
OSD menu. (See the menu chart on the following page.) Rock the joystick UP or DOWN to
highlight a parameter or submenu, then press the joystick in to select it. Rock the joystick
right (R) to highlight an option, UP or DOWN to identify the option, then press the
joystick in to select it. Repeat this method to navigate the menu system and select options.
www.observint.com
12