Table of Contents
Advertisement
SECTION 3
Software Setup
Use the SETUP joy stick on the OSD control panel to navigate through the menu system. Press the joy stick down (toward the PC
board) to enter the SETUP menu or select an entry, rock the stick up or down to highlight an item in the list, and left or right display
the option you want to select.
3.1 Menu operation
Navigation through the menu system is performed with the joystick located inside the camera dome cover assembly. You can rock
the joystick to the right, left, up , or down, and press the joystick down (Set functions).
Up button : Moves the cursor upwards in the menu. Use this button to select an item or adjust the parameters.
•
Down button : Moves the cursor downwards in the menu. Use this button to select an item or adjust the parameters.
•
Right button : Moves the cursor to the right in the menu. Use this button to select or adjust the parameters of the selected
•
item. The parameter changes each time this button is pressed.
Left button : Moves the cursor to the left in the menu. Use this button to select or adjust the parameters of the selected item.
•
The parameter changes each time this button is pressed.
Set button : Executes selections and displays a submenu for an item with the mark.
•
Joystick
2 Megapixel HDcctv Indoor/Outdoor IR Dome Cameras
SECTION 3: SOFTWARE SETUP
Video monitor
RCA connector
9
Advertisement
Table of Contents
