Avaya S8500 Installing And Configuring page 79

Figure 14: S8500B front panel
h2ms85bf KLC 091704
Figure notes:
1. CD-ROM drive activity LED
2. CD-ROM eject button
3. Diskette drive activity LED
4. Diskette eject button
5. System error LED
6. System locator LED
7. Hard disk drive activity LED
The functions of the front-panel LEDs are as follows:
Table 7: S8500 front-panel LEDs
LED
Power on
Hard disk drive
Locator
System error
CD-ROM drive
Floppy disk drive
(S8500B only)
Figure 15: Rear view of S8500B Media Server
the back panel of the S8500B. Each port connector has two LEDs, one for transmission activity
and one to indicate the transmission speed. The port LEDs on the S8500C are the same as on
the S8500B.
Installing and Configuring the Avaya S8500 Media Server
1 2
.
When lit and not flashing, the media server is turned on.
When flashing, the media server is turned off and still
connected to the AC power source. When off, AC power is
not present, or the power supply or the LED failed.
When on or blinking, indicates HDD activity.
Use this blue LED to locate the media server if the media
server is in a location with numerous other media servers.
When on, indicates a system error.
When on or blinking, indicates activity on the CD-ROM drive.
When on or blinking, indicates activity on the FDD drive.
3
8. Power on LED
9. Power control button
Press to reset the media
10. Reset button —
server and run the power-on self-test
(POST).
11. USB connections for the compact flash drive.
Description
on page 80 shows the Ethernet port LEDs on
S8500 LEDs
4 5 6 7
11 10
February 2007
8
9
79