Avaya S8500 Installing And Configuring page 20

Chapter 1: Introduction
Figure 8: S8500C Media Server connectivity guide
h2msb8cp LAO 052506
Figure notes:
1. Eth0—To the customer network if the
control network is nondedicated. Or, to
the control-network Ethernet switch if the
control network is dedicated
(straight-through CAT5 cable)
2. Eth1—To the Services laptop computer
(cross-over CAT5 cable)
Note:
If the S8500C is configured as an ESS, the port assignments are different:
Note:
●
●
●
20
Installing and Configuring the Avaya S8500 Media Server
Slot 1
Eth0: Control Network A
Eth3: Control Network B
Eth4: LAN, if two dedicated control networks are used
In either case, ETH2 is an internal port dedicated to the SAMP.
4
1
2
1
2
3. Eth3—to the customer network if the
control network is dedicated
(straight-through CAT5 cable)
4. Eth4—Not used
3
Slot 2
2
1
February 2007