Chapter 4: Media server configuration
After you install the Communication Manager software, you must use the Avaya Installation
Wizard to configure the media server.
This section covers the following tasks:
Copying files to the media server
●
Creating a super-user login
●
Running the Avaya Installation Wizard
●
Verifying the RMB IP information
●
Installing SAMP firmware
●
Verifying the media server connection to the customer LAN (if provided)
●
Enabling firewall settings
●
Enabling network time servers
●
Checking LED activity on the dual NIC
●
Configuring the NIC
●
Note:
Ensure that you have the completed Electronic Preinstallation Worksheet (EPW)
Note:
before you start this process.
Note:
Ensure that your networking and Web browser settings are correct. For more
Note:
information, see
Installing and Configuring the Avaya S8500 Media Server
on page 40
on page 40
on page 42
on page 42
on page 42
on page 44
on page 44
on page 46
on page 46
Configuring the network for Windows 2000 and XP
on page 43
on page 94.
39
February 2007