Table of Contents
Advertisement
RocketRAID 3522 BIOS Utility
RocketRAID 3522 BIOS Utility
The RocketRAID 3522's BIOS Utility can be accessed using the "Ctrl+H" command.
This command should be displayed automatically when the RocketRAID 3522's BIOS
screen appears during the system's boot up procedure.
1 - BIOS Command Overview
The RocketRAID 3522 BIOS Utility provides a wide selection of RAID related
commands. These commands are displayed towards the top of the utility's interface.
General Navigation
Press ALT + the first letter of the each menu item (highlighted in red) to access the
corresponding menu (Alt + D will open the "Disk" menu bar). You can also press F10
to quickly browse through the various menu selections. Use the ← → arrow keys to
select the desired item, and press ENTER to open the menu. Use the ↑ ↓ arrows keys
to select the desired command from each menu, and press the ENTER key to confirm
the selected command.
There are two windows in the utility's interface; Disk interface and Array interface.
Use the TAB key to switch between each interface.
Supervisor/User mode
The default BIOS operation mode is User mode; user can only view some information
of the controller through BIOS. If user wants to modify the setting of the RAID
controller, it must be changed to Supervisor mode:
3-1
Advertisement
Table of Contents
