Bios Command Overview - HighPoint RocketRAID 2640X4 User Manual

RocketRAID 2640X4 BIOS Utility
RocketRAID BIOS Utility
Access the RocketRAID host adapter's BIOS utility using the "Ctrl + H".
This command should be displayed automatically when the host adapter's BIOS
screen appears during the system's boot up procedure.

1 - BIOS Command Overview

The BIOS Utility provides a wide selection of RAID related commands. These
commands are displayed towards the top of the utility's interface.
← → ↑ ↓
Use the arrow keys to scroll through the various commands, and the
arrows to browse through the corresponding command menus. Use the ENTER key
to execute the selected command.
The ESC button can be used to cancel the selected command, or return to the previ-
ous command menu.
Create
- this command is used to create RAID arrays. Section 2 discusses this
command in detail.
Delete
- this command will delete the selected RAID array.
Warning: This command may result in permanent data loss - it should only be used
if data stored on the target array is no longer relevant, or has been backed up to an
alternate storage device.
3-1