Table of Contents
Advertisement
2 - Installing the RocketRAID 3522 Host Adapter
Note: Make sure the system is powered-off before installing the RocketRAID 3522
host adapter.
The RocketRAID 3522 includes both standard and low-profile brackets. It may be
necessary to attach the low-profile bracket in place of the standard bracket, depend-
ing upon the chassis design.
1.
Open the system chassis and locate an unused PCI-E x8 (or x16) slot.
2.
Remove the PCI slot cover.
3.
Gently insert the RocketRAID 3522 into the PCI-E slot, and secure the bracket to
the system chassis.
4.
After installing the adapter, attach the disk enclosures to the RocketRAID 3522
the appropriate external Mini-SAS cables.
5.
Consult the disk enclosure's manual for proper hard disk installation procedures
Note: The Full RocketRAID 3522 product include the Rocket Ethernet board. The
Ethernet board can be removed to fit the 2U chassis in case of user won't use the
OBM feature.
RocketRAID 3522 Hardware Description/Installation
2-2
Advertisement
Table of Contents
