Page 1
RocketStor 6328 Thunderbolt™ 2 RAID Host Adapters User’s Guide for Mac Revision: 1.00 Mar. 12, 2014 HighPoint Technologies, Inc. HighPoint Technologies Inc.
The RocketStor 6238 is set to revolutionize the compact desktop and portable workstation market; no other Thunderbolt™ connectivity Adapter packs so much power and versatility into such a tiny package! The RocketStor 6328 delivers true, 20Gb/s bi-directional transfer bandwidth for any Mac or Windows PC platform with Thunderbolt™ capability.
If the RAID is in critical status, please follow “Chapter 8 RAID Disk Failure Recovery” to recover the RAID disk e. For other RAID status, please refer p.14 for RAID recovery 6. Setting up the RocketStor 6328 6.1 Storage Enclosure Preparation RS6328 support two types of storage enclosure: External Mini-SAS and External SATA (eSATA).
The supported enclosure interface: (Mini-SAS) (eSATA) RocketStor 6328 connection diagram: 6.2 Connecting the RocketStor 6328 (RS6328) Steps: a. Connect the RS6328 to the storage enclosure using an industry standard Mini-SAS cable. Power on the storage enclosure. b. Connect the Power Adapter to the RS6328.
Driver Installed entry for controller pci1103, 6328 should be “Yes” 2) RAID Management software installation. In order to configure and manage the HighPoint RAID array, you will need to install the Web RAID Management software (also known as the WebGUI).
N, where N refers to the disk module number. Click the device icon; it will display detailed information about the selected device. If any of the disks are not detected, check the corresponding disk module and make sure the drive is securely installed (see page 6 for more information). HighPoint Technologies Inc.
Page 9
The initialization process will zero out all disks so a correct parity can be generated during disk writes. Correct, consistent parity information is essential for the integrity of data when rebuilding RAID 5 arrays. d. Select the Available Disks: Click the Select all button. HighPoint Technologies Inc.
Page 10
Click the Create button to create the array. The following diagram displays RAID5 foreground initialization in progress. HighPoint Technologies Inc.
A newly created RAID Array will be recognized as an empty disk. OS X must initialize it before it can be used. a. Initializing the RAID disk. After a RAID array has been created, OS X will display a pop-up window with options to initialize, Ignore or Eject. Click Initialize to open Disk Utility. HighPoint Technologies Inc.
Page 12
RAID array. Note: The RS6328 supports Thunderbolt power management. While the RS6328 is connected to the host system using the Thunderbolt cable, shutting down the host will automatically power down the RS6328 HighPoint Technologies Inc.
Click the Maintenance link to the right of the RAID array. e. Click the Delete button from the Array Maintenance pop up window. Confirm the deletion by click OK button. Note: All data on the selected RAID array will be deleted after you confirm this selection. HighPoint Technologies Inc.
Unlock the failed drive’s disk module of the storage enclosure and remove the failed drive by gently sliding the drive module out of the enclosure. WARNING: Make absolutely sure that you remove the failed drive indicated by the GUI. Reinstall the disk module immediately if you remove the wrong disk module. HighPoint Technologies Inc.
Restore the data from the backup source to the new array. 11. Technical Support If you encounter any problems while utilizing the HighPoint RocketStor Thunderbolt Series product, or have any questions about this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support Department. Web Support: http://www.highpoint-tech.com/websupport/...
All replaced parts or Products shall become the Property of HighPoint. This warranty shall not apply if the Product has been damaged by accident, misuse, abuse or as a result of unauthorized service or parts. Warranty service is available to the purchaser by obtaining a Return Material Authorization number (RMA) and by delivering the Product during the warranty period to an authorized HighPoint service facility or to HighPoint.
APPENDIX A - Using the WebGUI (full guide) HighPoint’s web-based RAID Management Software (also known as the WebGUI) is used to monitor and configure hard disks and RAID arrays attached to the HighPoint RocketStor adapter. 1. Running the HighPoint Web RAID Management software (WebGUI)
Drop-down menu that displays the controller that is currently being managed. Host Adapter Model: Name of the RAID controller Enclosure Count: Total number of HighPoint Rocket EJ (Port Multiplier) devices connected. It should be always “0” Physical Drive: Total physical drives detected by this RAID controller Legacy Disk:...
It lists other controller information such as processor type, temperatures, voltage, SDRAM, Battery, Firmware version, and SAS address. C. Update Firmware Controller BIOS/Firmware can be update from Physical page. Browse for BIOS image and click the Submit button. HighPoint Technologies Inc.
Native Command Queuing, I/O commands that are in a queue are re-ordered for better efficiency Identify LED: A blinking cursor to identify the location of a HDD 3.3 Physical - Rescan The item will rescan the controller to detect devices. HighPoint Technologies Inc.
It is the logical disk that is connected to the RAID controller and has already been reported to the operating system. Example: Mac OSX – “Disk Utility” Physical Device Information: The physical disk attached to the RAID controller. HighPoint Technologies Inc.
To create an array, users need to provide information to tell utility how to construct this array. This section gives a detail description. The following diagram shows the creation page. A. Array Type Choose the RAID type to create. The HighPoint’s RAID controller supports RAID 0, 1, 5, 6, 10, 50 & JBOD. HighPoint Technologies Inc.
Page 23
4. Background: The RAID array is accessible while disk initialization is being performed. a. This option will delete all content on the disks. b. This method will slow the initialization process, but allows the array to be utilized immediately HighPoint Technologies Inc.
Page 24
User can select how many disks to construct the array or click this “select all” to use all HDDs for the array creation. H. Capacity This allows users to define how much disk capacity will be used. If “maximum” is chosen, then it means use all calculated available disk space. HighPoint Technologies Inc.
Page 25
Status: Status of RAID array. Other option include (Normal, Critical, Disable, Rebuilding, Verifying) Array Maintenance: Maintenance provides a selection of general maintenance features and options for the selected array: 1. Diagram 1: Array is in “Normal” Status HighPoint Technologies Inc.
Page 26
: This option is only available when RAID is in “Critical” status. Click the “add disk” button to add a new disk in. The following diagram shows how to add a free disk to join the critical array rebuilding. HighPoint Technologies Inc.
When creating redundant RAID arrays (1, 5, 6, 10 or 50) a Spare HDD can be configured to automatically help rebuild a degraded redundant RAID. Users can assign any free storage into spare pool. And any disk is in spare pool can be removed as well. The following diagrams show how to operate “spare pool”. HighPoint Technologies Inc.
4.4 Logical - Rescan When hot-plugging a single device or RAID array, the Rescan button prompts the RAID controller to scan for device changes. 4.5 Logical - Beeper Mute This will temporarily disable the internal speaker on the RAID controller. HighPoint Technologies Inc.
This option is used to restrict WebGUI access to the local system and not access: allowing remote access. F. Set Rebuild Priority: When rebuilding a critical RAID array, there are five rebuilding options to choose from. Each rebuild priority will affect the rebuild completion time. HighPoint Technologies Inc.
Page 30
The default password “hpt” can be changed. Note: If the current password is lost or forgotten, you can uninstall and reinstall the Web RAID Management software to restore the default settings. When changing the password, the maximum number of characters allowed is eight. HighPoint Technologies Inc.
5.2 Setting - Email The HighPoint RAID controller can be configured to send Event Log entries to one or more E-Mail addresses. The email setting has SMTP setting and recipient which users need to configure it. A. Enable Event Check this item to enable Event Notification Notification: B.
Click “Clear” to remove all current entries from the Event View log. Next: The Event View log can span several pages. Click “Next” to view past entries. Download: The Event View log can be saved as a text file for reference. HighPoint Technologies Inc.
HDD goes beyond the threshold an alert will be triggered. SMART: SMART attributes for each HDD will be displayed. The following diagram display detail SMART information read out from HDD Schedule This allows user to schedule a task to run HighPoint Technologies Inc.
Page 35
10 and 50 arrays. User can name each task and specify the frequency, date, hour, minute and second for each session. Regular maintenance is highly recommended for any redundant RAID array, and is essential for maintaining healthy, reliable storage configurations. HighPoint Technologies Inc.
Recover can help repair RAID arrays that have been assigned the disabled status. This feature helps protect RAID configurations by storing multiple copies of RAID configuration data, which administrators can use to restore a disabled RAID array. Note: Please refer the How-To guide that explains this Recover feature: http://www.highpoint-tech.com/PDF/support/WebGUI_Recover_Feature.pdf HighPoint Technologies Inc.
), it indicates that the disk is not initialized and will need to be initialized for the 1 time before it can be used with HighPoint RAID card. The device status "Legacy". An existing file system has been created on the HDD.
Page 38
The array is not available. Two scenarios can cause this to happen. First - a lost RAID disk member exceed the minimum required to maintain a RAID level. Second - a disk failed before the initialization or rebuilding process complete. The status is in “Disabled”. Array disk member diagram is like this: HighPoint Technologies Inc.
Data archives and RAID 6 with dual performance, and for applications that ideal for application rotating medium write require that requires data parity performance with frequent/heavy write protection data protection in sessions. case of up to two drives failure HighPoint Technologies Inc.