Table of Contents
Advertisement
Installing the RocketRAID 3522 driver during a fresh Windows 2000/XP/2003/x64
installation
1.
After booting from the Windows 2000/XP/2003 CD-ROM, when the Windows
Setup blue screen appears, look towards the bottom of the screen. Windows will
prompt you to press the F6 key if you want to install a third party SCSI or RAID
driver. Press the F6 key at this time.
2.
The setup procedure will continue, and will later instruct you to press the "S" key
to specify additional adapters. Press the "S" key as instructed.
3.
Next, the setup program will prompt for the insertion of the driver diskette. Please
insert the driver diskette, and then press ENTER to continue.
4.
The next window will display several driver options. Please select the
RocketRAID 3522 Controller for the corresponding operating system, and press
ENTER to continue.
Windows Vista Driver Installation
Installing the driver during a fresh Windows Vista installation
1.
Boot from Windows Vista DVD.
2.
When the screen "where do you want to install Windows" appears, click
"Load driver" and browse for the driver location. Windows Vista can install
drivers from several media types: floppy diskette, USB flash disk or CD.
3.
Select the RocketRAID 3522 controller driver, and click "Next".
4.
The driver is now installed - you can now continue on with the installation
procedure.
Installing the driver for an existing Windows Vista system
1.
Install the RocketRAID 3522 host adapter into the PC, then boot up Windows
Vista.
2.
Windows should automatically detect the card, and display the "Found New
Hardware" wizard pop-up window. Select "Locate and install driver software".
When Windows asks: "Windows needs your permission to continue", select
"continue".
3.
Select "I don't have disc, show me other options" and then select "Browse
my computer for driver software".
4.
Specify the location of the driver and click "Next".
RocketRAID 3522 Driver and Software Installation
4-4
Advertisement
Table of Contents
