Intercom Pairing; Pairing With Other Sph10H Headsets For Intercom Conversation - Sena SPH10H User Manual

SPH10H

8. INTERCOM PAIRING

8.1 Pairing with Other SPH10H Headsets
for Intercom Conversation
The SPH10H can be paired with up to three other
headsets for Bluetooth intercom conversation.
1. Turn on the two SPH10H headsets (A and B) that
you would like to pair with each other.
2. Press and hold the Jog Dial of the headset A and B
for 5 seconds until red LEDs of the both units start
to flash rapidly. You will hear a voice prompt saying
"Intercom pairing".
3. Simply tap the Jog Dial of any one of the two
headsets A or B (It doesn't matter that you
choose A or B.) and wait until the LEDs of both
headsets turn to blue and intercom connection
is automatically established. The two SPH10H
headsets A and B are paired with each other for
intercom conversation. If the pairing process is
not completed within one minute, the SPH10H will
return to stand-by mode.
16
B
Pairing A & B
4. You can make other pairings between the headset
A and C, and between the headset A and D by
following the same procedure as above.
A
B D
C
Pairing A & C
A
D
C
A
B
C
Pairing A & D
D