Enabling/Disabling Voice Activated Phone Answering; Enabling/Disabling Voice Activated Intercom - Sena SPH10H User Manual

9.2 Enabling/Disabling Voice Activated
Phone Answering
Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can answer incoming
calls by simply saying a word loudly enough. For
example, when you hear a series of beeps for an
incoming call, you can answer the phone by saying
"Hello" or any other word loudly. This is enabled from
the factory but you can disable this. If this mode is
disabled, you have to tap the Jog Dial or the Phone
Button to answer an incoming call.
9.3 Enabling/Disabling Voice Activated
Intercom
Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can initiate an intercom
conversation with the last connected intercom
"VOX phone"
Enable
Tap the Phone Button
Tap the Jog Dial
"VOX intercom"
Disable
Tap the Phone Button
Tap the Jog Dial
friend by speaking any word loudly enough.The
most effortless way to trigger intercom VOX is to
blow into the microphone as if blowing dust off the
microphone. If you start an intercom conversation
by VOX, the intercom terminates automatically when
you and your intercom friend remain silent for 20
seconds. However, if you manually start an intercom
conversation by tapping the Jog Dial, you have to
terminate the intercom conversation manually.
However, even when this feature is enabled, if you
terminate intercom conversation manually with the
Jog Dial, you are not able to start intercom by voice
temporarily. In this case, you have to tap the Jog Dial
to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind
noise. If you tap the Jog Dial to start an intercom
conversation, it is not terminated by 20 seconds of
silence. After turning SPH10H off and on, you can
start intercom by voice again.
SPH10H
19