Enabling/Disabling Voice Prompts; Enabling/Disabling Sidetone; Delete All Bluetooth Pairing Information; Exit Voice Configuration Menu - Sena SPH10H User Manual

SPH10H

9.4 Enabling/Disabling Voice Prompts

Voice Prompt
Factory Default
Enable
Disable
You can disable voice prompts by configuration setting,
but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset

9.5 Enabling/Disabling Sidetone

Voice Prompt
Factory Default
Enable
Disable
Sidetone is the sound of your own voice as picked
up by your headset's microphone and reproduced
in your own ear, by your own speaker. It helps you
to naturally speak at the correct level according to
varying helmet noise conditions. If this feature is
enabled, you can hear what you are speaking during
an intercom conversation or a phone call.
20
"Voice prompt"
Enable
Tap the Phone Button
Tap the Jog Dial
"Sidetone"
Disable
Tap the Phone Button
Tap the Jog Dial

9.6 Delete all Bluetooth Pairing Information

Voice Prompt
Factory Default
Execute
To delete all Bluetooth pairing information of the
SPH10H, rotate the Jog Dial until you hear a voice
prompt saying "Delete all pairings", and tap the
Phone Button to confirm. Taping the Jog Dial is not
available for this setting.
9.7 Exit Voice Configuration Menu
Voice Prompt
Factory Default
Enable
To exit voice configuration menu and get back to
stand-by mode, rotate the Jog Dial until you hear a
voice prompt saying "Exit configuration", and tap
the Phone Button to confirm. Tapping the Jog Dial is
not available for this setting.
"Delete all pairings"
N/A
Tap the Phone Button
"Exit configuration"
N/A
Tap the Phone Button