Speed Dialing - Sena SPH10H User Manual

SPH10H
the Phone Button after entering phone numbers
on the mobile phone keypad.
- Tap the Phone Button in stand-by mode to activate
the voice dialing of your mobile phone. For this,
the voice dialing feature must be available on
the mobile phone. Refer to your mobile phone
manual for further instruction.
Note:
1. If you are using multipoint mobile phone connection
and you have an incoming call from the second
phone during the call of the first phone, then you may
still receive the call from second phone. In this case,
the call from the first phone is on waiting mode. If you
end a call, then it will automatically guide you to the
first phone call.
2. If you are using multipoint connection of mobile
phone and GPS, you may not be able to listen to the
GPS voice instruction during the phone call.

12.2 Speed Dialing

You can quickly make a phone call by using the voice
speed dial menu.
1. To enter into the voice speed dial menu, double tap
the Phone Button and you will hear a mid-tone single
beep and a voice prompt saying "Speed dial".
24
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items.
3. Tap the Phone Button or the Jog Dial to select a
voice menu among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
4. After selecting the last number redial menu, you
will hear a voice prompt saying "Last number
redial". Then, to redial the last phone call number,
tap the Phone Button or the Jog Dial.
5. To call one of the speed dials, rotate the Jog
Dial clockwise or counter-clockwise to navigate
between the menus until you hear a voice prompt
saying "Speed dial (#)". Then, tap the Phone
Button or the Jog Dial.
6. If you want to exit the speed dial immediately,
rotate the Jog Dial until you hear a voice prompt
saying "Cancel", and tap the Phone Button or the
Jog Dial. If any button is not pressed within 15
seconds, the SPH10H will exit the voice speed dial
menu and goes back to stand-by mode.
(4) Speed dial 3
(5) Cancel