Certifications And Compliances; Table A-12: Certifications And Compliances - Tektronix SPG600 User Manual

Appendix A: Specifications

Certifications and Compliances

Table A-12: Certifications and compliances

Category
EC Declaration of Conformity-EMC
EC-Declaration of Conformity-Safety
Australia/New Zealand Declaration of
Conformity-EMC
Safety
Installation (overvoltage) Category
A-10
Standards or description
Meets the intent of Directive 89/336/EEC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EN55103
Environmental
Part 1 Emission
EN55022
EN55103-1, Annex A
EN55103-1, Annex B
Part 2 Immunity
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
IEC61000-4-11
EN55103-2, Annex A
EN61000-3-2
EN61000-3-3
Compliance was demonstrated to the following specification as listed in the Official Journal of
the European Union:
EN61010-1:2001 Safety requirements for electrical equipment for measurement,
control, and laboratory use.
Complies with the EMC Framework, demonstrated per Emission Standard AS/NZS 2064
(Industrial, Scientific, and Medical Equipment).
Complies with the following safety standards:
UL 61010B-1
CAN/CSA C22.2 No. 1010.1
IEC 61010 -1:2001 Second Edition
Terminals on this product may have different installation (overvoltage) category designations.
The installation categories are:
CAT III Distribution-level mains (usually permanently connected). Equipment at this level is
typically in a fixed industrial location.
CAT II Local-level mains (wall sockets). Equipment at this level includes appliances,
portable tools, and similar products. Equipment is usually cord-connected.
CAT I Secondary (signal level) or battery operated circuits of electronic equipment.
SPG600 & SPG300 Sync Pulse Generators User Manual
Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use.
E2-commercial and light industrial
Class B radiated and conducted emissions
Radiated magnetic field emissions
Inrush current; I peak=14.6 amps
Electrostatic discharge immunity
RF electromagnetic field immunity
Electrical fast transient/burst immunity
Power line surge immunity
Conducted RF immunity
Voltage dips and interruptions immunity
Radiated magnetic field immunity
AC power line harmonic current emissions
Voltage changes, fluctuations, & flicker