Intuicom RTK Bridge User Manual page 27

Section 2: Initialization and Configuration
Use the Radio Advanced Configuration to modify such parameters as setting the
appropriate HOP table for the country/regulatory domain in which the unit will operate.
Warning: random changes to the wireless data radio configuration parameters can
render the wireless configuration incompatible with receiving units. Contact Intuicom
for guidance configuring the unit for specific needs. Be exceptionally careful not to
change the setting for "Setup Port" – doing so could require returning the unit to
Intuicom for reset.
Embedded Cellular Modem Configuration – This option is used with first
initializing/provisioning the internal modem. This option can also be used to view the
current signal strength and registration status. It is further possible to modify the default
parameters for the dialup number, username, password and APN. It is recommended not
to change any of these parameters from their defaults.
Upgrade RTK Bridge Firmware – This option allows the unit's base firmware to be
upgraded or downgraded. Contact Intuicom for the latest firmware and the firmware
upgrade utility.
Revision 1.4 23 © 2009 Intuicom, Inc.