Intuicom RTK Bridge-X Installation Manual
The smart antenna configured to accept cmr or rtcm format rtk corrections from a bridge.
Hide thumbs
Also See for RTK Bridge-X:
- Installation manual (19 pages) ,
- Installation manual (9 pages) ,
- Installation manual (11 pages)
Advertisement
Quick Links
Download this manual
See also:
Installation Manual
Installation Guide
®
RTK Bridge
-X
Integration with:
®
®
Ag Leader
GPS 2500
Intuicom, Inc.
4900 Nautilus Ct. Ste. 100
Boulder, CO 80301
(303) 449-4330
www.intuicom.com
Advertisement
Related Manuals for Intuicom RTK Bridge-X
Summary of Contents for Intuicom RTK Bridge-X
- Page 1 Installation Guide ® RTK Bridge Integration with: ® ® Ag Leader GPS 2500 Intuicom, Inc. 4900 Nautilus Ct. Ste. 100 Boulder, CO 80301 (303) 449-4330 www.intuicom.com...
- Page 2 Intuicom reserves the right to make changes to this document without notice. Unless otherwise agreed to in writing, Intuicom assumes no responsibility or liability for the use of this document or for the infringement of any copyright or other proprietary right and Intuicom shall deem nothing contained in this document a warranty or guarantee.
-
Page 3: Section 1: Installation Requirements
GPS/GNSS reference network. The intended audience for this document is a dealer or integrator familiar with the GPS 2500 as well as general familiarity with the Intuicom RTK Bridge–X. The Intuicom RTK Bridge–X User Guide covers the steps necessary for its configuration. -
Page 4: Installation Instructions
TNC connectors) are connected and placed where they have good sky view and good cellular signal. • Using the Intuicom RTK Bridge-X to GPS 2500 data/power cable and null-modem adapter, connect the RTK Bridge-X data port to Serial 2 (Port B) on the GPS 2500. Version 1.0 Intuicom, Inc. - Page 5 Ag Leader Addendum or contact Ag Leader directly. • The RTK Bridge-X should be configured to receive the GPS position from the data port. In the Profiles page, in the profile that is to be used, under GPS Source, select Serial.
- Page 6 • Verify the receiver is set to the right Application Slot for RTK by viewing the diagnostics information under the Receiver Tab. The firmware version shown below should match the version you installed in Section 3. Version 1.0 Intuicom, Inc.
- Page 7 Section 3: Ag Leader Firmware Update Instructions and RTK Setup Guide For Technical Support of the RTK Bridge-X, Intuicom recommends “Intuicom Remote Support”, please contact Intuicom for details on this real- time support program. For general technical support, please contact us at support@intuicom.com...
- Page 8 Section 3: Ag Leader Firmware Update Instructions and RTK Setup Guide Version 1.0 Intuicom, Inc.
- Page 9 Section 3: Ag Leader Firmware Update Instructions and RTK Setup Guide Version 1.0 Intuicom, Inc.
- Page 10 Section 3: Ag Leader Firmware Update Instructions and RTK Setup Guide Version 1.0 Intuicom, Inc.
- Page 11 Section 3: Ag Leader Firmware Update Instructions and RTK Setup Guide Version 1.0 Intuicom, Inc.
- Page 12 Section 3: Ag Leader Firmware Update Instructions and RTK Setup Guide Version 1.0 Intuicom, Inc.
- Page 13 Section 3: Ag Leader Firmware Update Instructions and RTK Setup Guide Version 1.0 Intuicom, Inc.
Need help?
Do you have a question about the RTK Bridge-X and is the answer not in the manual?
Questions and answers