Pc Programming Mode; Defining Permitted Cellular Prefixes (Home Use); Programming Mode; Defining Permitted Cellular Prefixes - ITS Telecom CGW-D Operation Manual

Installation and Operation Guide
4.3

PC Programming Mode

Connect the device to a PC through the USB interface. The LCD displays the programming mode
message (Figure 4-3).
4.4

Defining Permitted Cellular Prefixes (Home Use)

To define permitted cellular prefixes in home use configuration, perform the steps as follows:
a. Connect the PSTN line cable to the To PSTN socket on the device.
b. Connect a home phone to the To Phone/PBX socket on the device.
c. Launch the CGW-D application.
d. Click ADD on the Dialing Parameters tab. Add Prefix window opens (Figure 4-4).
e. Enter the cellular prefix number (up to 6 digits long, numbers only).
f. Click APPLY. A message requesting administrator's password appears.
4-2
Programming
Figure 4-3. Programming Mode
If required, install USB drivers as detailed in Chapter 2.
Figure 4-4. Defining Permitted Cellular Prefixes