ITS Telecom CGW-D Operation Manual page 41

Operation
Pulse drop (Loop disconnect) duration.
The length of the loop current disconnection to
indicate to the FXS direction about the
conversation end.
Conversation timeout. The telephone
conversation will be automatically terminated
after this timeout.
First digit dialing timeout. During this time
interval the gateway waits for the first dialed
digit.
Inter digit timeout. Maximum available time
interval between dialed digits
Disable End dialing digit functionality
Cellular network prefixes (White list).
The CGWT-D will transfer an outgoing call to
the cellular network if and only if its direction is
present in the list. All other outgoing calls are
transferred via PSTN. Up to 30 numbers with a
maximum of 8 digits can be defined.
Delete call barring (White list prefixes).
Call Forward mode.
The CGW- D will transfer an incoming call from
PSTN (FXO) to a predefined /free cellular
number either Unconditionally or after No-
Answer from PBX/Home. In addition to
Gateway provides dial tone for the free dialing
via Cellular network follow by the Cellular
prefixes (White list) settings
Enable Local Area Numbering support.
Gateway checks the number of dialed digits of
the outgoing cellular call and adds a local area
code when the dialed number is equal to the
local area PSTN numbers.
Command
*380 + XX
where:
XX = number of 1/10sec
Default 08 = 800 msec
*390 + XX
where:
XX = time out in [minutes]01-99
00 = unlimited
*391 + XX,
where XX – time in seconds 03-60
*392 + X
where: XX – time in seconds 1-9
*394
*400 + XX + YY..YY + #
where:
XX = 01 – 30 (ordinary numbers of
permitted prefixes)
YY..YY = Permitted prefixes (0 – 9, *, #)
*400 + XX + # (delete a specific list
number) or *400 + *1 (delete the whole
restricted number list).
*420 + X
where:
X = 0: disabled;
X = 1: enabled to specific number;
X=2 enabled for free dialing (Dial tone
providing)
*425 + X
where:
X = 0: disabled;
X = 1: enabled
CGW-D
Default
00 (disabled)
00 (unlimited)
10
3
None
None
0
0
3-17