Installation and Operation Guide
Item
Call Forward
Call Forward
Disabled
No Answer Call
Forward
NA Call Forward
Destination
No Answer
Forwarding Time
Free Call Forward
Local Area Numbering
Enable Local Area
Numbering
Local Area Code
Number of digits
in local number
New Call Key
APPLY
3-8
Function
Defines that incoming calls from the FXO side will
not be forwarded.
Defines that if an incoming call from the FXO side
is not answered, it will be forwarded to the
number specified in the field below.
Active only if the above radio button is selected.
Contains the number to which the call will be
forwarded.
Active only if the above radio button is selected.
Specifies the time in seconds after which the
unanswered call from the FXO side is forwarded.
Enables to forward calls from the FXO side to a
cellular extension (corresponds to the Maximum
Number of Digits to be Dialed parameter).
Enables to add a local area prefix for the land
dialed number. If the PSTN line is disconnected,
the gateway will add a local area prefix
automatically to the dialed local area number.
Contains the local area code (prefix).
Defines the number of digits in the land number
so that the system could identify whether it is
required to add a local area code when the
number is dialed via a cellular network.
Enables to define a key that will start a new call.
Applies all changes.
Default
Range/
Option
Selected
Deselected
Disabled
20, disabled
Deselected
Deselected
Disabled
4 digits
max.
7
###
Need help?
Do you have a question about the CGW-D and is the answer not in the manual?
Questions and answers