Computer Management Window - ITS Telecom CGW-D Operation Manual

o. Click Next. A new window informs that USB-COM serial port installation is completing
(Figure 2-21).
Figure 2-21. Found New Hardware Wizard – Window 11
p. Click Finish to finalize the installation process.
To test the connection between PC and Device perform the steps as follows:
a. Run the VMS software from the supplied CD.
b. From the main menu select Communication Read Configuration and click OK. VMS starts
reading the configuration from the Device system through the USB interface. If the VMS application
does not find USB port automatically, you can resolve it as follows:
Right-click My Computer icon and select Manage from pop-up menu. Computer
Management window appears (Figure 2-22).
Click the Device Manager branch. The device management tree appears on the right.
Figure 2-22. Computer Management Window
CGW-D
2-11