Initial Vidyoroom Setup For Hd-100 Rev. C - Vidyo VidyoRoom HD-220 User Manual

Front
AUX USB port
Do not power on the HD-100 unit until Display(s) and Camera are fully
connected and powered on.
1. Connect Power cable.
2. Connect Ethernet cable to ETH-O and to your network.
3. Connect to TV using HDMI to HDMI cable on
HDMI-to-TV.
NOTE: A second screen can be connected to the VGA port
(2 display is for Data Share viewing only).
nd
Connecting Your VidyoRoom for Your HD-100 Rev C System Connecting Your VidyoRoom for Your HD-100 Rev C System
HDMI
3.
Primary Display
5.
Audio Device
Audio Device
Chat 50
OR
Chat 150
OR
Konftel 300
Use only one audio device
between the above
Back
VGA2USB (optional)
17

Initial VidyoRoom Setup for HD-100 Rev. C

3.
VGA
CAM CTRL
2.
Ethernet
Capture
Card
1.
Power
4. Connect camera:
* For video connection use HDMI/DVI cable for Sony or
HDMI/HDMI cable for Minrray
* For Camera Control connection:
a. Connect VISCA cable to camera
b. Connect VISCA cable to USB 2.0/Serial DB9 cable
c. Connect USB/Serial DB9 cable to the CAM CTRL port on
the unit
TM
5. Connect USB SpeakerPhone cable to an available
USB 2.0 port.
Secondary Display
(For Data Share viewing only)
4a. VISCA
4b.
4c.
D89-CONNECTION
USB TO SERIAL
4.
DVI/DVI Video Device
for Sony
Sony EVI-HD3V
DVI/HDMI
For 720p set to #3
for Minrray
OR
Minrray HDCAM90-S-VY