Vidyo VidyoRoom HD-220 User Manual page 43

Firmware
You may be required from time to time to upgrade your VidyoRoom to a new
version or recover to a previous working version. You may also need to upgrade
your VidyoRoom in the event of a hardware malfunction or system failure. In
this case, upgrading restores the VidyoRoom software to the last installed ver-
sion.
Note: When you upgrade your VidyoRoom, you lose all your network and other
settings and must rec0nfigure the unit. You may want to record your current set-
tings before beginning the upgrade process.
The Firmware page displays the current installed version of the VidyRoom sys-
tem and the current base image version installed on the machine. The Vidyo-
Room HD-50 and HD-100 can store two image files while the HD-220 can store
more.
To restore the VidyoRoom software to the last installed version, click a
ƒ ƒ
checkbox to select the image file, and then click the Re‑Image button.
To upgrade using a new image from Vidyo, click the Browse button to locate
ƒ ƒ
the .tbv file and click the Upload & Re‑Image button.
The upgrade process can take up to five minutes and will automatically
reboot the VidyoRoom system when successful. The upgrade progress
appears in a console on the VidyoRoom monitor.
You receive an alert if you are upgrading with the same image file
ƒ ƒ
already installed on your VidyRoom. If you are restoring the current
image, acknowledge this alert and proceed with the upgrade.
If you encounter a FAIL error, note the red error code in the lower left
ƒ ƒ
corner of the screen and contact Vidyo technical support.
TM
41
Web Configuration Pages