Initial Vidyoroom Setup For Hd-220 Rev B - Vidyo VidyoRoom HD-220 User Manual

Power Button
Front
NOTE: Stands must be used when placing the unit vertically.
Do not power on the HD-220 unit until Display(s) and Camera are fully con-
nected and powered on.
1. Connect Power cable.
2. Connect Ethernet cable to ETH-O and to your network.
3. Connect the TV using HDMI/DVI cable to DVI Display
dongle and then connect to an available display port.
* Repeat for the second display
Adapter,
Display Port/DVI
3.
Primary & Secondary
Display
5.
Audio Device
Chat 150
OR
Yamaha PJP-20UR
OR
Konftel 300
Use only one audio device
between the above
Back
VGA2USB (optional)
11

Initial VidyoRoom Setup for HD-220 Rev B

DVI/DVI
for Sony
DVI/HDMI
for Minrray
2.
Ethernet
4c.
DB9-CONNECTION
USB TO SERIAL
1.
Power
4. Connect camera:
* For video connection use HDMI/DVI cable for Sony
or HDMI/HDMI cable for Minrray
* For Camera Control connection:
a. Connect VISCA cable to camera
b. Connect VISCA cable to USB/Serial DB9 cable
c. Connect USB/Serial DB9 cable to the CAMCTRL port on
the unit
TM
5. Connect USB SpeakerPhone cable to an available
USB port.
4.
Video Device
Sony EVI-HD7V
(1080p@30fps)
Preferred
OR
Sony EVI-HD3V
(720p@60fps)
OR
Minrray HDCAM90-S-VY
(1080p@30fps)
4a.
VISCA
4b.