Vidyo VidyoRoom HD-220 User Manual page 39

The Basics
The Account, Network, UDP Port Range and
Proxy sections work just as they would for
any other server. Your choices on the Link
Speed & Duplex dropdown menu, as you can
see, are Auto/Auto, 100Mbps Duplex and
1Gbps. The default setting is Auto/Auto and
under most circumstances you shouldn't
change it unless requested to do so by your
network adminstrator.
Audio
Set the micrphone and speaker inputs to
match the type of connection you're using
for them. You can drag the sliders to change
the maximum sensitivity of the mic and
maximum volume of the speakers.
Video
Select either Single or Dual Displays to
match your configuration.
Select whether you want to use 720p or
1080p Resolution. (If your display can only
do 720p there's no advantage in selecting
1080p. If your display can do 1080p you can
choose 720p if you want to use less band-
width.)
Select the maximum bandwidth at which you
want the VidyoRoom to transmit.
Choose your Transmit Resolution. (1080p30
won't be an available option if you Maximum
Bandwidth is to less than 2Mbps. You'll also
need to click the Reset Camera option if you
change Transmit Resolution.)
Turning 3-Layer Mode on can provide a
higher quality experience to users of mobile
devices.
The Apply button puts any changes you
make to the settings above into effect im-
mediately. There's no need to reboot the
VidyoRoom.
Settings
For more information about the different settings, please see pages 23-33. You
can set these from the web configuration pages:
HD-220 & HD-200
TM
37
Web Configuration Pages