Front
1.
Power
Back
Connecting Your VidyoRoom for Your HD-200 System
7.
VGA2USB (optional)
6.
Yamaha PJP-25UR
(optionaL)
4.
5.
2.
Camera
VISCA
1.
Connect Power cable.
2.
Connect Ethernet cable to ETH-1 and to your network.
3.
Connect to TV using DVI to HDMI cable on TV-1. A second screen can be
connected to TV-2.
4.
Connect HD Camera using BNC Coax HD-SDI cable to CAMERA.
(See illustration on page 9.)
5.
Connect VISCA cable to camera VISCA port and to SERIAL
(if applicable).
6.
Connect Yamaha PJP-25UR or ClearOne Chat 50 to available USB port.
7.
Connect VGA2USB (optional) to available USB port.
13
Initial VidyoRoom Setup for HD-200
Initial VidyoRoom Setup for HD-200
3.
Primary Display
3.
Secondary Display
Ethernet
TM