Vidyo VidyoRoom HD-220 User Manual page 51

1080p Configuration with the VidyoRoom HD220 Appendix
Note: After configuring the camera, reset it to activate the new video format
setting.
In the VidyoRoom system user interface, navigate to the Video settings option
and enable the proper camera and display resolutions, as shown below:
For the Display Resolution setting, select 1080p.
Note: For optimal video quality in 1080p mode, set the Maximum Transmit
(TX) bandwidth to a value greater than 2Mbps. Also note that it is possible to
increase the call video rate while in an active call by pressing 9# on the VidyoR-
oom system remote control.
The VidyoRoom must be configured for a Transmit Resolution of 1080p/30.
Note: If VidyoRoom HD100 or HD50 systems are to receive a 1080p/30 video
format from the HD220 systems, the display resolution on those systems must
be configured for 1080p resolution.
TM
49