Displaying Link Arbitration Status; Displaying Link Scheduling Profile Information; Enable Statistics Gathering - Patton electronics OnSite 2800 Series User Manual

OnSite 2800 Series User Manual
2800>enable
2800#configure
2800(cfg)#context ip router
2800(ctx-ip)[router]#interface wan
2800(if-ip)[wan]#use profile service-policy Voice_Prio out

Displaying link arbitration status

The
show service-policy
argument interface that select a certain IP interface. This command is available in the operator mode.
Mode: Operator execution
Step
1 node>show service-policy {interface name} Displays the link arbitration status
Example: Displaying link arbitration status
The following example shows how to display link arbitration status information.
2800>show service-policy
available queue statistics
--------------------------
default
- packets in queue: 10

Displaying link scheduling profile information

The
show profile service-policy
vice-policy profile. This command is only available in the administrator mode.
Mode: Administrator execution
Step
1 node#show profile service-policy name Displays link scheduling profile information of the
Example: Displaying link scheduling profile information
The following example shows how to display link scheduling profile information of an existing service-policy
profile VoIP_Layer2_CoS.
2800#show profile service-policy VoIP_Layer2_CoS
VoIP_Layer2_CoS
default (mark layer 2 cos -1)

Enable statistics gathering

Using the
debug queue statistics
Link scheduler configuration task list
command displays link arbitration status. This command supports the optional
Command
command displays link scheduling profile information of an existing ser-
Command
commands enables statistic gathering of link scheduler operations.
8 • Link scheduler configuration
Purpose
service-policy profile name
Purpose
110