IBM BladeCenter Management Module User Manual page 56

Generating a certificate signing request: Complete the following steps to
generate a new private encryption key and certificate signing request:
46
BladeCenter Management Module: User's Guide
on page 46. After you finish typing the information, click Generate Certificate.
Your new encryption keys and certificate are generated. This process might take
several minutes.
A page similar to the one in the following illustration is displayed and you can
see that a self-signed certificate is installed.
1. In the navigation pane, click MM Control → Security.
2. In the SSL Server Configuration for Web Server section, make sure that the
SSL server is disabled. If it is not disabled, select Disabled in the SSL Server
field and then click Save.
3. In the SSL Server Certificate Management section, select Generate a New
Key and a Certificate Signing Request. A page similar to the one in the
following illustration is displayed.
4. Type the information in the required fields and any optional fields that apply to
your configuration. The fields are the same as the self-signed certificate with
some additions.
Read the information in the following sections for a description of each of the
common fields.
Required certificate data
The following user-input fields are required for generating a self-signed
certificate or a certificate signing request.