I/O Module Tasks; Power/Restart; Management - IBM BladeCenter Management Module User Manual

I/O Module Tasks

Select the choices in the I/O Module Tasks section to view and change the settings
or configuration on network-interface I/O modules in the BladeCenter unit.
Note: Some choices do not apply to, and are not available for, some types of I/O
modules such as pass-thru modules.

Power/Restart

Select the Power/Restart choice to display the power status of the I/O modules and
perform the following actions:
v Turn on or turn off an I/O module
v Reset an I/O module

Management

Select the Management choice to view or change the IP configuration of the I/O
modules; ping an I/O module; return an I/O module to the default configuration;
25
Chapter 3. Using the management-module Web interface