Firmware Update; Mm Control - IBM BladeCenter Management Module User Manual

enable the I/O module ports, external management of I/O module ports, other I/O
module settings; and start the configuration and management firmware that is in an
I/O module.
Note: The initial factory-defined user ID and password for the I/O module firmware
See the Installation and User's Guide for your BladeCenter unit for more information
about basic I/O module configuration. See the documentation that comes with the
I/O module for details about the configuration and management firmware for the I/O
module. Documentation for some I/O modules is on the IBM BladeCenter
Documentation CD.

Firmware Update

Select the Firmware Update choice to update the firmware in a I/O module. Select
the target I/O module and the firmware file to use for the update; then, click
Update. You can obtain the firmware files from the IBM Support Web site at
http://www.ibm.com/pc/support/.

MM Control

Select the choices in the MM Control section to view and change the settings or
configuration on the management module that you are logged in to (the primary
management module) through this management-module Web interface session. If
your BladeCenter unit has redundant management modules, the configuration
settings of the primary management module are automatically transferred to the
secondary management module.
Management module configuration includes the following items:
v The name of the management module
v Up to 12 login profiles for logging in to the management module
v Ports used by the management module
v How alerts are handled
v The management module Ethernet connections for remote console and for
v Settings for the SNMP, DNS, SMTP, and LDAP protocols
v Settings for secure socket layer (SSL) and secure shell (SSH) security
This also includes performing the following tasks:
v Backing up and restoring the management-module configuration
v Updating the management-module firmware
v Restoring the default configuration
v Restarting the management module
v Switching from the current active management module to the redundant
26
BladeCenter Management Module: User's Guide
are:
v User ID: USERID (all capital letters)
v Password: PASSW0RD (note the zero, not O, in PASSW0RD)
communicating with the I/O modules
management module