IBM BladeCenter Management Module User Manual page 23

The Enter Network Password window opens.
2. Type your user name and password. If you are logging in to the management
module for the first time, you can obtain your user name and password from
your system administrator. All login attempts are documented in the event log.
Note: The initial factory-defined user ID and password for the management
module are:
v User ID: USERID (all capital letters)
v Password: PASSW0RD (note the zero, not O, in PASSW0RD)
3. Follow the instructions that appear on the screen. Be sure to set the timeout
value you want for your Web session.
The BladeCenter management-module Web interface window opens.
Note: The upper left corner of the management-module Web interface window
shows the location and identity of the active (primary) management module.
In the following example, the primary management module is identified as
"SN#" and is installed in management-module bay1.
Chapter 3. Using the management-module Web interface
13