IBM BladeCenter Management Module User Manual page 16

v Netscape Navigator 4.72, or later (version 6.x is not supported)
v Mozilla version 1.3, or later
Notes:
1. For best results when using the Web browser, set the resolution on your monitor
2. The Web interface does not support the double-byte character set (DBCS)
The Web-based user interface communicates with the management-module Web
interface and management-module command-line interface, that are part of the
firmware that comes with the management module, to perform tasks such as:
v Defining the login IDs and passwords
v Selecting recipients for alert notification of specific events
v Monitoring the status of BladeCenter components
v Controlling BladeCenter components, including the blade servers
v Accessing the I/O modules to configure them
v Changing the drive startup sequence for a blade server
v Setting the date and time
v Using a remote console for the blade servers
v Changing ownership of the keyboard, video, and mouse
v Changing ownership of the CD-ROM drive, diskette drive, and USB port
v Activating On Demand blade servers
Note: The IBM Director program is a system-management product that comes with
You also can use the management-module Web interface and management-module
command-line interface to view some of the blade server configuration settings. See
Chapter 3, "Using the management-module Web interface," on page 11 and the IBM
Eserver BladeCenter Management-Module Command-Line Interface Reference
Guide for more information.
6
BladeCenter Management Module: User's Guide
to 800 x 600 pixels or higher and 256 colors.
languages.
the BladeCenter unit. To configure the remote alert recipients for IBM
Director over LAN, the remote alert recipient must be an IBM
Director-enabled server.