Configuration File; Firmware Update; Restore Defaults - IBM BladeCenter Management Module User Manual

Hide thumbs Also See for BladeCenter Management Module:

Table of Contents

Configuration File

Select the Configuration File choice to back up or restore the management-module

configuration file. See "Using the configuration file" on page 54 for instructions.

Select the Firmware Update choice to update the management-module firmware; if

a second management module is installed, the firmware update will automatically

be applied to both management modules. Click Browse to locate the firmware file

you want; then, click Update.

Management-module firmware is in several separate files that are installed

independently; you must install all of the firmware update files. You can obtain the

firmware files from the IBM Support Web site at http://www.ibm.com/pc/support/.

Select the Restore Defaults choice to restore the factory default configuration of the

management module.

BladeCenter Management Module: User's Guide

Table of Contents

Do you have a question about the BladeCenter Management Module and is the answer not in the manual?