Cisco Prisma II Installation And Operation Manual page 92

LCI Module Tree Overview,
Module Information
Information about a module (its parameters, alarms and statuses) is located in the
Module Details window. Within the module tree, you can access this window using
one of the following four methods:
• Double-click the chassis and select the module in the graphic that appears.
• Right-click the chassis and select Open from the menu that appears.
• Double-click the module.
• Right-click the module and select Details from the menu that appears.
Note: Although you can use the method that's most convenient for you, the
procedures throughout this chapter are described using the right-click module
technique.
For more information about each of these methods, refer to the next section,
Accessing the Module Details Window.
78-739260-01 Rev F
Continued
Operation Using LCI 4-11