Cisco Prisma II Installation And Operation Manual page 45

The ICIM Front Panel,
The ICIM Keypad
The ICIM keypad has twelve keys that allow you to input and monitor operational
parameters. The table below lists each key and a brief description of its function.
Button
STAT
CFG
ALRM


SEL
ICIM
SHIFT

ENTER
MAIN
78-739260-01 Rev F
Continued
Function
Displays status information for the selected module.
Displays configuration information for the selected module.
Displays all of the parameters in alarm for a selected module.
Moves the menu selection area up. Also increases numerical
readings of selected configuration parameters.
Moves the menu selection area down. Also decreases numerical
readings of selected configuration parameters.
Selects the highlighted parameter.
Displays ICIM module information such as firmware version,
serial number, and baud rate.
Shifts function of a keypad button to the function or number label
just above that button.
Decreases numerical readings of selected configuration
parameters.
Increases numerical readings of selected configuration
parameters.
Enters input data (if valid).
Exits the current menu and displays the MAIN ICIM menu.
Operation Using the ICIM 3-5