Community Names - Cisco Prisma II Installation And Operation Manual

Community Names

Default Community Names
The community name provides primitive security and context checking for both
agents and managers that request and initiate trap operations. An agent does not
accept a request from a manager outside the community.
Community names that ICIM expects are:
Read Community
Read/Write Community
Trap Community
Note: These can be changed using the Boot Dialog (in Boot Dialog for ICIM/SNMP
Configuration later in this chapter) along with the default port number for HMS
traps.
3-32
public
private
SNMP_trap
Operation Using the ICIM 78-739260-01 Rev F