Cisco Prisma II Installation And Operation Manual page 50

The ICIM Password,
Changing the User Password
If a user password has been entered, it may be changed. However, the current
password must be active prior to changing it. If the current password has expired
(more than 10 minutes have passed since your last keystroke), you must re-enter the
current password before changing to a new one.
Follow these steps to change a user password.
Access the Password menu as shown in the procedure Accessing the
1.
Password Menu.
2.
Use the
3.
Press the
4.
When Change Psw /Shift Off appears, press the
On - then enter the eight digits of your new password, using the 0-9 number
keys.
If at any time you input a digit that is incorrect or wish to change a digit, use
the CAN (Cancel) function by pressing the
5.
Press the
Results:
The ICIM updates the display to show if your password entry was
•
accepted or rejected.
If the entry was accepted, you are able to return to the MAIN menu.
•
3-10
Continued
key to scroll down until Change Psw is highlighted.

key to select Change Psw.
SEL
key to input the new password.
ENTER
Operation Using the ICIM
key to display Shift
SHIFT
ALRM
key to delete that digit.
78-739260-01 Rev F