Cisco Prisma II Installation And Operation Manual page 78

Boot Dialog for ICIM/SNMP Configuration,
2. Press any key repeatedly until the following prompt appears.
Result:
(M)odify any of this or (C)ontinue? [M]
3. Press Enter to get the default value for Modify.
Result:
For each of the following questions, you can press <Return>
to select the value shown in braces, or you can enter a new
value.
How should the board boot?
1. pROBE+ (for debugging)
2. TFTP
3. Run ICIM Application
Which one do you want? [3] 2
4. Select 2 for TFTP.
Note: We will not be doing a code download, but this gets access to the rest of the
parameters dialog.
3-38
(for code download)
Operation Using the ICIM
Continued
78-739260-01 Rev F