The Front Panel - Cisco Prisma II Installation And Operation Manual

The Front Panel

Overview
The Prisma II Optical Amplifier front panel is designed with one input connector
and one or more output connectors. ALARM and LASER indicators on the front
panel allow you to monitor laser and alarm status at a glance.
The features of the front panel of the Prisma II Optical Amplifier are shown below.
Alarm Indicator
Laser On Indicator
Optical Output
Optical Input
Optical Amplifier Illustration
The front panel of a single-wide Prisma II Optical Amplifier is shown below.
78-739260-01 Rev F
Part
Illuminates or blinks when an alarm condition occurs.
Illuminates when there is optical power present.
Connects the output signal to the optical cable.
Connects the input signal to the optical cable.
Function
Introduction 1-5