Operation Using The Icim; Overview - Cisco Prisma II Installation And Operation Manual

Overview

Introduction
The procedures in this chapter apply if you are using the Prisma II ICIM to configure
and operate the Prisma II Optical Amplifiers.
Scope of this Chapter
Included in this chapter are descriptions of the ICIM front panel and the ICIM liquid
crystal display (LCD), and detailed procedures on how to use the software menus to
configure the optical amplifier.
In This Chapter
This chapter contains the following topics.
ICIM Introduction
The ICIM Front Panel
The ICIM Password
Operating the ICIM
Monitoring Operating Status Using the ICIM
Configuring the Optical Amplifier Using the ICIM
Checking Optical Amplifier Alarms Using the ICIM
Checking Manufacturing Data Using the ICIM
Using the ICIM to Save the Configuration
SNMP Configuration Capability
Community Names
Setting SNMP Trap Receiver Parameters
New SNMP Variables
Boot Dialog for ICIM/SNMP Configuration
New Procedure for Adjusting Alarm Thresholds
78-739260-01 Rev F
Chapter 3

Operation Using the ICIM

Topic
Operation Using the ICIM
See Page
3-2
3-3
3-6
3-13
3-17
3-19
3-21
3-25
3-27
3-28
3-32
3-33
3-34
3-36
3-41
3-1