User Code Change Event Displays; Supervisory Event Displays; System Monitor Event Displays; Wireless Jamming Event Displays - Security Command XR20 User Manual

User Code Change Event Displays

This displays any user code additions, deletions, or changes.
32-Character Display
ADD 11:41A 10/17
US:19 BY US:12
User Code Event Types - There are three event types you may see here:
ADD - User added DEL - User deleted
CHG - User code or authority level was changed.

Supervisory Event Displays

This displays the automatic test report date and time.
32-Character Display
MSG 11:58P 10/17
AUTO RECALL

System Monitor Event Displays

This displays any problems with the system AC power or battery.
32-Character Display
TBL 11:41A 10/17
AC POWER
System Monitor Event Types - There are two event types:
TBL - Trouble RST - Restore
System Monitor Event Names - There are two system monitors:
AC POWER BATTERY
36
Description
At 11:41 AM user 12 added user
19.
Description
The test report was sent to the
central station at the date and
time shown.
Description
An AC failure occurred on
October 17 at 11:41 AM.
XR20 User's Guide

Wireless Jamming Event Displays

This displays wireless interference events that have occurred.
Keypad Display
ALR 11:41A 10/17
WIRELESS
Wireless Jamming Event Types - There are three event types:
TBL - Trouble (an interference event occurred when the panel
was disarmed)
ALR - Alarm (an interference event occurred when any area
was armed)
RST - Restore

Wireless Trouble Event Displays

This displays events when the wireless receiver was not
communicating with the panel.
Keypad Display
TBL 11:41A 10/17
WIRELESS
Wireless Trouble Event Types - There are two event types:
TBL - Trouble RST - Restore
Description
The DMP wireless receiver
detected interference on October
17 at 11:41 AM.
Description
A DMP wireless receiver trouble
occurred on October 17 at 11:41
AM.
Appendix