Silencing An Alarm - Security Command XR20 User Manual

When the alarm bell or siren is sounding, enter your user code or present your
card to a keypad or reader during the Status List display.
All/Perimeter or Home/Sleep/Away System
What to do when a trouble tone is sounding
You can silence the trouble tone by pressing any key. This only silences the
keypad and does not correct the condition that originally caused the problem.
Information furnished by DMP is believed to be accurate and reliable.
The XR20 panel is UL listed for Standard Line Security Household Service and Commercial Burglary Service.

Silencing an Alarm

CANCEL VERIFY displays.
• If a burglar alarm is valid, press VERIFY to send a verification message
to the Central Station.
• If a valid alarm has not occurred, press CANCEL to cancel the alarm
and send an Abort or Cancel message to the Central Station. The
keypad displays ALARM CANCELLED and the security system will be
disarmed.
© 2008 Digital Monitoring Products, Inc.
This information is subject to change without notice.