Security Command XR20 User Manual page 9

Panic Functions
Your keypad may be set up to send a Panic, Emergency, or Fire
report to the central station. This function is optional. If this
option is programmed for your keypad, icons display below the top
row Select keys/areas.
Security Command™, Thinline™, Aqualite™ Keypads
Press and hold the two Select keys adjacent to the desired icon for
2 seconds, until a beep from the keypad is heard.
Top Row Select Keys
Police
Security Command™ Keypad Panic Keys
Top Row Select Keys
Police
Thinline™/Aqualite™ Keypad Panic Keys
Introduction
!
Emergency Fire
Emergency Fire
Clear Touch™ Keypads
Touch the icon for 2 seconds until a beep is heard.
Clear Touch™ Keypad Panic Icons
Security Command™, Thinline™, Aqualite™ Keypads
7/0 Panic Function
Security Command™, Thinline™, and Aqualite™ Keypads may also be
programmed at installation to allow the user to initiate an optional
Panic alarm by simultaneously pressing and holding the 7 and 0
(zero) keys. When the 7 and 0 keys are pressed for a short time,
the keypad sends a Panic alarm report to the central station.
Note: The 7/0 Panic Function is not available on Clear Touch™
keypads.
XR20 User's Guide
Touch Select Areas
Police Emergency Fire
5