Programming Your Name; Queuing; Returning Call To Host System - Vertical SBX IP 320 User Manual

SBX IP 320 User Guide

Programming Your Name

1. Lift the handset.
2. Dial 563.
3. Dial 74.
4. Enter your name using the same codes as those of keysets (refer to "Entering Characters"
on page 1-59).
5. Press the hook switch. A confirmation tone sounds.
6. Hang up.

Queuing

If you access a busy line, you may request the system to place you on hold, until the next line
becomes idle.
1. Lift the handset.
2. Press the hook switch.
3. Dial 556. A confirmation tone will sound when the call is accepted.
4. Hang up.

Returning Call to Host System

If the SBX IP 320 is connected to another system, you can use this feature to transfer a call to
an extension on the other system.
1. While connected to an extension call, press the hook switch.
2. Dial 551.
3. When you hear new dial tone from the other system, dial the extension number on the
other system.
4. When the station answers, speak (Screened Transfer) or hang up (Unscreened Transfer)
to transfer the call.
3-8
For Review Only - Draft Document 11/26/07 COMPANY CONFIDENTIAL - DO NOT Distribute