Ide Primary/Secondary Master/Slave Udma; Usb Controller; Usb Keyboard Suppory; Init Display First - TMC LI7WM User Manual

IDE Primary/Secondary Master/Slave UDMA

These fields allow your system to improve disk I/O throughput to
66Mb/sec with the Ultra DMA/66 feature. The options are Auto and
Disabled.

USB Controller

The options for this field are Enabled and Disabled. By default, this
field is set to Enabled.
USB Keyboard Support
By default, the USB Keyboard Support field is set to Disabled.

Init Display First

This field allows the system to initialize first the VGA card on chip or
the display on the PCI Slot. By default, the PCI Slot VGA is initialized
first.
AC97 Audio
By default, the AC97 Audio is set to Enabled.

AC97 Modem

By default, the AC97 Modem is set to Disabled.
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.

POWER ON Function

This field allows powering on by the following methods:

Onboard FDD Controller

Select Enabled if your system has a floppy disk controller (FDC)
installed on the motherboard and you wish to use it. If you install an
add-in FDC or the system has no floppy drive, select Disabled in this
field. This option allows you to select the onboard FDD port.
47
Password
Hot KEY
Chapter 6 BIOS and System Setup
Keyboard 98
BUTTON ONLY
LI7WM User's Manual