Power Management Setup; Power Management Set; Acpi Function; Acpi Suspend Type - TMC LI7WM User Manual

6.7 Power Management Setup

The Power Management Setup allows you to save energy of your
system effectively. It will shut down the hard disk and turn off video
display after a period of inactivity.

ACPI Function

ACPI Suspend Type

Power Management

Video Off Method

Video Off In Suspend

Suspend Type
Modem Use IRQ
Suspend Mode
HDD Power Down
Soft-Off by PWR-BTTN
Wake-Up by PCI Card
PW On by Modem/LAN
CPU Thermal-Throttling
Resume by Alarm
Date (of Month) Alarm
Time (hh:mm:ss) Alarm
** Reload Global Timer Events **
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D] #
ACPI Function
This field allows you to enable or disable the ACPI (Advanced
Configuration Power Interface) function on the motherboard. By
default, this field is set to Disabled
ACPI Suspend Type
The options for the ACPI Suspend Type field are S1(POS) and
S3(STR). The default setting for this field is S1(POS).
Note: The S3(STR) hardware is optional.
Power Management
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving
Max. Power Saving
User Define
49
CMOS Setup Utility – Copyright © 1984-1999 Award Software
Power Management Setup
Enabled
S1 (POS)
User Define
DPMS
Yes
Stop Grant
3
Disabled
Disabled
Instant-Off
Disabled
Enabled
62.5%
Disabled
0
0
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Minimum power management
Maximum power management.
Each of the ranges is from 1 min. to 1hr.
Except for HDD Power Down which
ranges from 1 min. to 15 min. (Default)
Chapter 6 BIOS and System Setup
Menu Level
LI7WM User's Manual
ITEM HELP