Cpu Frequency Selection; Clear Cmos Select: Jp11 - TMC LI7WM User Manual

4.1 CPU Frequency Selection

Setting CPU Speed in the BIOS Setup
The LI7WM motherboard allows users to set the CPU speed
through the BIOS Setup. The parameters used in configuring
the CPU speed include CPU Clock Multiplier (X3, X3.5, X4,
X4.5, X5, X5.5, X6, X6.5, X7, X7.5, X8) and CPU Clock
(66MHz, 68MHz, 7 5MHz, 83MHz or 100MHz, 103MHz,
112MHz, 133MHz).
In the initial setup, the system automatically detects the base
Frequency of the CPU (66MHz or 100MHz/133MHz). Under
the under CPU Speed Setting section, use the ↑ and ↓ keys to
easily change the CPU speed or press the PageUp or
PageDown key to see more options.
Overclocking could cause the system not to boot in the
process of setting the CPU speed. When this happens, turn
off the computer by pressing the power button and turn it on
again by pressing the Insert key and the power button
simultaneously. When the system is turned on, press the
Delete key to enter BIOS Setup and configure the CPU
speed.
4.2 Clear CMOS Select: JP5
Use JP5, to clear the contents of the CMOS RAM. Do not clear
the CMOS RAM unless it is absolutely necessary. Before clearing
CMOS, you should disconnect the ATX-power connector from
the motherboard.
JP5
1
3
1
17
Jumper Setting
pin 1-2: short
2
pin 2-3: short
2 3
Chapter 4 Configuring the Motherboard
Function
Clear CMOS
LI7WM User's Manual
Normal